With the BuggyBoard Mini™ connected to your stroller or pram you have the perfect combination for stress-free outings. BuggyBoard Mini™ provides security for your child in crowds and high traffic areas. When your child is too tired to walk, or when you are in a hurry, the BuggyBoard Mini™ makes it easy for both of you.

Features:

• Easy to connect and disconnect
• Board leveling system
• Large anti slip surface
• Large ground clearance, easy to walk behind
• The BuggyBoard-Mini™ remain in a fixed position in relation to the stroller, ensuring comfort and safety for the child, allowing you to pass over bumps and curbs without affecting the balance of the stroller
• The BuggyBoard-Mini™ can be attached to a stroller in minutes, with no tools required thanks to the Easy-Fit system. This system also allows you to attach, level, adjust or remove your BuggyBoard in just seconds.
• The Lift-n-Store system lifts your board up and out of the way when not in use.

Requirements:

• The BuggyBoard Mini™ is designed to easily be attached to the upright tubing of a stroller or to the frame of a pram with a width between uprights of 26 - 50 cm (10" - 20").
• The connectors are made to fit square, oval or round tubing with a maximum circumference of 8 cm (3.2 in.). No wheel axle required.

Square tubing

• Maximum circumference of 8 cm / 3,2”
• Min. 14x14 mm (0,55” x 0,55”)
• Max. 21x28 mm (0,84” x 1,12”)

Round tubing

• Min. ø 14 mm (0,5”)
• Max. ø 28 mm (1,1”)

Oval tubing

• Min. ø 24x10 mm (1,0” x 0,4”)
• Max. ø 31x24 mm (1,24” x 1,00”)

The BuggyBoard Mini™ is tested and approved by:
SGS Standards Technical Services Co. Ltd, Guangzhou, China, according to EN 1888:2003+A1,A2 and A3:2005 and by SP Swedish National Testing and Research Institute according to the relevant clauses in EN 1888:2003 Clause 6.1.1 - 6.1.5, 7.2.2.6, 17.3, 18.2 and 21.4

Suitable for children from 2 - 5 years or maximum 20 kg (44 lb).